Waterproofing Services, Manufacturing & Project Supply

Isoheal sealer is applied after concrete casting and curing to reduce permeability and enhance waterproofing, ideal for roofs, basements, etc.

Isoplus is a single-component acrylic coating that cures into a flexible, seamless membrane, perfect for waterproofing and maintaining old roofs.

Isoplus Cool Roof is an acrylic membrane that reflects 80% of solar heat, reducing energy costs by 30% and providing waterproofing for roofs and walls.

Flexicon is a two-component elastomeric coating that combines cementitious binders and acrylic polymers to provide flexible, durable waterproof protection.

Isoplus Pump Primer is a water-soluble powder for priming concrete pumps, reducing blockages, pump horsepower, and diesel costs.

Isoplus Polymer Grout is designed to prevent staining and leaks in high and low wall corners, as well as where the floor meets the wall, making it ideal for bathroom waterproofing.

Water-based primer that reduces surface porosity and improves coating adhesion to concrete.

Elastomeric UV-resistant and weather-protective waterproofing top coat.

Crystalline coating that blocks concrete capillaries and prevents water ingress.

Fast-setting hydraulic compound for active leaks, patch repairs, haunching, anchoring and minor concrete defects.

Two-component grouting system comprising Part A powder and Part B polymer liquid for voids, cracks and honeycombs.

High-strength HDPE reinforcement mesh for crack control and stress distribution in waterproofing systems.

Three-component, solvent-free epoxy bonding and repair system comprising Part A and Part B liquids with Part C powder. For concrete, stone, metal, ceramic tiles and masonry.

Concentrated exterior biocidal wash for algae, moss, mould, fungal growth and organic staining.

Single-component acrylic polymer which forms a flexible impermeable membrane when mixed with cement.

PUD-acrylic hybrid polymer combining polyurethane flexibility with acrylic UV stability and adhesion.

Ready-to-use acrylic filler for non-structural internal and external cracks.

Cleaner for cement film, grout haze and post-installation residues on tiles and natural stone.

Epoxy coating for long-term corrosion protection of structural steel and other metal surfaces.

Dual shrinkage-compensated free-flow cementitious micro concrete for structural repairs and strengthening.

High-strength non-shrink micro concrete for heavy structural repair and critical load-bearing strengthening.

SBR latex bonding aid and cement modifier for repairs, waterproofing and flooring.

40 GSM non-woven needle-punched geotextile for liquid-applied waterproofing systems.

Three-component epoxy coating for water tanks and other containment structures, comprising Part A and Part B liquids with Part C powder. Confirm immersion conditions and any potable-water approval in the product-specific technical data sheet.

Two-component polyurethane waterproofing product for a continuous flexible membrane. Substrate suitability, application build-up and exposure conditions are to be confirmed in the approved technical data sheet.

Upgraded Flexicon 2K system with a higher-elongation and higher-tensile-strength formulation target. Supplied as Part A powder and Part B liquid. Final performance values require technical validation.

Single-component mastic coating for sunken slabs, lift pits and similar wet structures. Proposed water-tank applications require confirmation of immersion suitability; potable-water use requires specific approval.

High-strength liquid adhesive for tile and stone cladding on vertical and horizontal surfaces. Select the system to suit substrate, stone type and loading. Mechanical restraint requirements must be assessed for vertical cladding.

Single-component anti-corrosive coating for prepared structural steel, metal fabrications and steel frameworks. Formulation, surface preparation, film thickness and exposure suitability are specified to suit the project.

Silicone-modified premium pure-acrylic exterior emulsion.

Long-lasting premium exterior emulsion.

Economy exterior emulsion.

Metallic premium emulsion for decorative effects.

Emulsion coating for cement blocks, pavers and interlocking blocks.

Decorative and protective tile coating.

Ultra-shine premium luxury interior emulsion.

Easy-clean washable sheen interior emulsion.

Premium smooth interior emulsion.

Economy interior emulsion.

Epoxy primer range.

Water-based interior masonry primer.

Water-based exterior masonry primer.

Solvent-based primer range.

Satin-finish enamel paint.

Decorative coating range for project finishes. Final finish and formulation are specified per order.

Durable smooth interior-cum-exterior emulsion.

Economical acrylic distemper for interior walls. Washability and finish are specified in the agreed formulation.

Ready-to-use styrene-acrylic putty paste.

Glossy alkyd enamel for wood and metal.

Water-based interior and exterior masonry primer.

Exterior waterproofing masonry primer.

Economical red-oxide anti-corrosive metal primer.

Alkyd rust-preventive yellow primer.

Class F+B oil-modified phenolic insulating varnish.

Exterior waterproofing paint.